小广告位主标题
小广告位副标题
查看更多

How to choose a good angle grinder

Release time:2019-04-08 15:20:51

The electric angle grinder is a grinding, cutting, descaling and polishing process of a metal member by using a high-speed rotating thin-plate grinding wheel, a rubber grinding wheel and a wire wheel. Angle grinders are suitable for cutting, grinding and brushing metal and stone. Water is not allowed during operation. The formaldehyde detector (CH2O) must use a guide plate when cutting stone. For models equipped with electronic controls, grinding and polishing can also be carried out if suitable accessories are installed on such machines.

Composition: motor 1, large pulley 2, small pulley 3, belt 4, bearing box 5, quick joint 6, flexible shaft 7, grinding head box 8, grinding wheel 9, grinding head handle 10 main components. The motor drives a bearing housing through the belt. After the speed is increased by the bearing housing, the driving shaft is rotated rapidly, and then the grinding wheel (rotation) is driven by the flexible shaft. The utility model has high working efficiency, long service life, low production cost and easy implementation.

Uses: Different metal grinding, cutting and rust removal can be carried out by changing the different grinding wheel. Second, replace the stone cutting blade to process ceramic tile, stone, formaldehyde detector (CH2O) can also cut wood small material and thin wood board (safer than cutting wood with a small saw blade on the angle grinder). Three for the hundred-page wheel, polishing wheel for metal polishing.

Operating procedure

An angle grinder is an abrasive tool used for FRP cutting and grinding. Lightweight multi-purpose angle grinder for deburring and sanding. The following methods are based on the Bosch GWS 580. The angle grinders of different brands and models are different. Please check the instructions before operation.

1. With protective eye mask.

2. After opening the switch, wait for the grinding wheel to rotate stably before working.

3, long hair workers must first tie their hair.

4, the cutting direction can not be toward people.

5, stop working for half an hour after half an hour.

6, can not hold small parts by hand to the angle grinder processing.

7. Conscientiously clean the working environment after the work is completed.

Copyright:Zhejiang Dongpai Industry and Trade Co., Ltd

Login