Electric circular saw purchase tips

    Selection of circular saw, according to the thickness of the material to be sawed in the maximum sawing depth allowed for the operation of the principle, for example, to saw 50ram thick board, you can use the saw blade diameter of 160mm circular aluminum, because of its sawing depth of 55mm, but must pay attention to, do not let the circular saw long-term operation under full load, should be appropriate to increase the selection of the machine, otherwise easy to burn the motor.

    When sawing wet wood, should be selected with a circular saw with propped up blade to prevent backlash, kickback and clip saw, when sawing tricot, fiberboard and other thin materials, it is appropriate to use a smaller model of circular saw, when processing thicker materials, should be the depth of the ruler to the maximum depth of sawing people to determine, to saw through the material as good.